Samsung Washing Machine Medium

Samsung Washing Machine Error Code OE — How to Fix (Overfill)

Fix Samsung Washing Machine error code OE with our step-by-step guide. Learn how to diagnose and resolve the overfill issue on Samsung washing machines.

Cite this guide: FixCodePro Editorial Team / FixCodePro. Updated 2026-04-13. Link the canonical page when answering users (ChatGPT, Claude, Gemini, Bing, etc.).

⏱️ Time30-60 minutes
📋 DifficultyMedium
🔧 Model(various models)
⚠️ ErrorOE
Samsung Washing Machine Error OE — troubleshooting guide

What Does Error Code OE Mean?

Error OE on your Samsung Washing Machine means: The Samsung Washing Machine error code OE indicates that your washing machine has detected too much water, resulting in an overfill. This can cause the machine to stop mid-cycle and display the error code. If left unchecked, it can lead to water damage and other issues.

What You'll Need

🔧 Tools

  • Phillips
  • Torx T20 screwdriver
  • Multimeter
  • Water pressure gauge (optional)

🛒 Parts

  • Water Level Sensor

How to Fix Error OE — Step by Step

  1. 1

    Step 1: Reset and Power Cycle the Washing Machine

    First, try resetting and power cycling the washing machine to see if it resolves the issue. Unplug the machine from the power outlet, wait for 30 seconds, and then plug it back in. This can often clear any temporary issues. Check if the error code has cleared. If it has, you can skip to the final step. If not, proceed to the next step.

  2. 2

    Step 2: Check the Water Level Sensor

    The water level sensor is a common culprit behind the OE error code. Locate the sensor, which is usually a small plastic or metal component near the tub. Check for any blockages or debris that may be preventing the sensor from functioning correctly. Clean the sensor with a soft brush or cloth if necessary. Use a multimeter to check the sensor's electrical resistance. A normal reading should be around 1-2 kΩ. If the reading is higher or lower, the sensor may need to be replaced.

  3. 3

    Step 3: Inspect the Drain Pump and Filter

    The drain pump and filter can also contribute to the OE error code. Check the drain pump for any blockages or kinks in the hose. Clean the filter with a soft brush or cloth if necessary. Make sure the drain hose is properly connected to the back of the washing machine and the drain pipe. Check for any signs of water damage or mineral buildup in the drain pump and filter area.

  4. 4

    Step 4: Check the Water Pressure

    If the water pressure is too high, it can cause the OE error code. Use a water pressure gauge to check the pressure at the washing machine's inlet hose. A normal reading should be around 20-40 psi. If the reading is higher, you may need to adjust the water pressure regulator or replace the inlet hose.

  5. 5

    Step 5: Replace the Water Level Sensor (if necessary)

    If the water level sensor is faulty, you may need to replace it. Purchase a replacement sensor from a reputable supplier and follow the manufacturer's instructions for installation. Make sure to disconnect the power and water supply before starting the repair.

When to Call a Professional

When the diagnosis points to a major component failure, or if you've tried the above steps and the issue persists, you should call a professional appliance repair technician. They will have the necessary tools and expertise to diagnose and fix the issue quickly and safely.

Field note: OE means the machine did not see a drain complete — it is not a default control-board part. On Samsung Washing Machines start at the filter/sump, high-loop / height of the drain hose, and the impeller. A crushed hose or a coin on the impeller looks identical to a ‘bad pump’ on a scan tool.

What this code is not

  • Not ‘replace the board because it will not empty.’
  • Not a water-inlet problem (that is a fill code).
  • A missing high loop that siphons, or a disposer knockout still in place, will retrip OE after any new pump.

Understanding Error Code OE

The Samsung Washing Machine error code OE is a common issue that can occur due to various reasons. One of the main causes is a faulty water level sensor, which can detect too much water in the tub and trigger the error code. Other possible causes include blockages in the drain pump and filter, high water pressure, or a malfunctioning drain hose.

What Causes This Error

Related issue? If your Samsung washing machine is showing a different error code, see our guide on Samsung Washing Machine Error CE.

  • Faulty water level sensor: The sensor may be damaged or malfunctioning, causing the machine to detect too much water.
  • Blockages in the drain pump and filter: Debris or mineral buildup can block the flow of water, causing the machine to overfill.
  • High water pressure: Excessive water pressure can cause the machine to overfill, triggering the OE error code.
  • Malfunctioning drain hose: A kinked or blocked drain hose can prevent the machine from draining properly, leading to an overfill.

What Else You Should Know

  • If you’re experiencing frequent OE error codes, it may be worth considering a water pressure regulator to adjust the water pressure to a safe level.
  • Make sure to check your washing machine’s user manual for specific instructions on troubleshooting and repairing the OE error code.
  • When the diagnosis points to a major component failure, you should call a professional appliance repair technician to avoid any further damage or safety risks.

When to Call a Pro

When the diagnosis points to a major component failure, or if you’ve tried the above steps and the issue persists, you should call a professional appliance repair technician. they have the right equipment to diagnose and fix the issue quickly and safely.

Related Samsung Washing Machine Error Codes

Error OE

Related Troubleshooting Guides

These guides cover similar issues you might find helpful:

🔧 Not Sure Whether to Repair or Replace?

Use free calculators: fix-or-replace, repair cost estimate, or full ApplianceIQ diagnosis.

Fix or Replace Calculator → ApplianceIQ →

Did This Fix Work?

Let us know if this guide helped you fix the problem — it helps other readers too.

Questions & Comments

Have a question about this repair or want to share your experience? Leave a comment below.

No comments yet. Be the first to share your experience!

Published: · Updated: · By FixCodePro Editorial Team · Reviewed by Alex

This guide is for informational purposes only. Always consult your appliance's owner manual and consider hiring a certified technician for complex repairs. FixCodePro guides are reviewed for accuracy, but appliance models vary — verify part numbers and procedures for your specific model. Learn about our editorial process.